Posts

Showing posts from January, 2014

Windows 8/Windows 8.1 procedure for unsigned drivers and problems with antivirus

Windows 8/Windows 8.1 procedure for unsigned drivers and problems with antivirus There are a couple of problems with "new" software when using Windows 8 or 8.1, not specific to BladeRF, SDR-Console V2, or UT-100C DVB-T dongle betas. My comments are not a criticism of Windows 8, it is a vast improvement on Windows 7 and a necessary path for creating an ecosystem operating system where a common user interface is available on all devices, be they PCs, laptops, tablets or phones. This is necessary for the central administration of all devices in an enterprise setting. In any case, I prefer the Windows 8 interface and access programs in the start tiles system. Windows Explorer has been re-written and is much better. The first issue is that Windows 8 won't install unsigned drivers or even tell you that it hasn't. Given security issues, that is not such a bad thing, but I wish Windows 8 would at least tell you of the problem (as Windows 7 does) when installing drive

UT-100C new drivers and software, ATV? DVB-T Repeater, Blackmagic Design Intensity Pro capture card

Image
DVB-T, UT-100C new drivers and software, DVB-T Repeater UT-100C new drivers and software There are new drivers and software for the UT-100 series devices from Hides/ITE: https://www.dropbox.com/sh/r80tjnkapkgzeg9/_3yj1s4t9 - I have yet to try them, but they are meant to fix compatibilities with Windows 8 and 8.1, possibly the unsigned driver problem, and more fixes to the PC2TV. I have yet to try them out. Blackmagic Design Intensity Pro capture card I have had trouble getting PC2TV to work but have been concentrating on the video source end. I want to be able to transmit digital video, not analogue (composite or S-video). PC2TV worked with my laptop webcam straight off, so I have been trying to get HDMI video to work. I want to be able to do amateur QSOs with real-time video and audio at high definition; the state of the art. As is noted later in this post, a repeater will assist this. I bought a Blackmagic Design Intensity Pro PCI-E capture card (AU$249). It seems to

Satellite tracking: hardware

Image
Satellite tracking: hardware I have made progress since the first post. I now have the main hardware assembled and am in the process of wiring everything together. The original plan to use a pair of satellite dish positioner wasn't viable. Luckily I discovered that before my order for the second positioner was sent. It is possible to do it that way but there are two problems. First, the positioners are driven by diseqc control. The controller I had was for linear actuators and simply passed the diseqc controls from the satellite receiver through. So I would have needed two satellite receivers with diseqc control for a positioner. Not a big deal except... Second, all the amateur satellite controllers uses conventional rotators, with a 24 VAC motor and 500 Ohm potentiometer. A further consequence of this was that I couldn't use the terrestrial TV rotator as it used a pair of synchronous motors for turning and indicating. Neat system, but couldn't be used. So I had t

Christmas comes late: Red Pitaya- Software defined instrumentation- order for first batch

Image
I occasionally troll through the "Kickstarter" projects for interesting ones, with both BladeRF and HackRF having their funding from there. http://www.kickstarter.com/ Some weeks ago I came across the "Red Pitaya" http://www.redpitaya.com/ . It seemed like "manna from heaven", a software-defined instrumentation system. Just what I wanted, not having the deep pockets needed for serious HF test gear. I thought I had missed out on the first run, but was down for a subsequent one. However, I received a quote last night, that I immediately accepted. They are due to be shipped February 24, that's only about 45 sleeps... plus shipping time from Slovenia (Eastern Europe is booming, we don't hear much about it here (Australia). I will try and write it up on my other blog on multilevel change) These are the objectives: "INITIAL SET OF OUT-OF-THE-BOX INSTRUMENTS   OSCILLOSCOPE: 2 channels @ 125 MS/s 14 bit digital with external or signal ba

My mast is up, finally.

Image
After much procrastination, my mast is up and I have a wire HF antenna, pending more elaborate VHF/UHF antenna. When I say "mast" I mean mast, it is the lower part of a big yacht mast. All aluminium and only weighs about 80 kg. It is self-supporting but has guys for more stability.     The mast tilts toward the camera position with an elaborate hand-driven pair of linear actuators. Using only half the mast (the other piece bolts on the top), makes for easy lifting. It can be left 2/3 down if needed, so it is not an obstacle on the ground and so I don't hit my head on it!   As you can see, "Ace" is not a mini-zebra, per first photo, and is kindly killing the weeds in the second. He is primarily, a Queensland Cattle dog or Blue Heeler, and yes, they are meant to have long tails for my American readers! The shadow in the shadow is "Jet" as in black, our whippet, also in a compromised position.     The tilting device was made at great

First IF tap IC-7410- Circuits and further notes

I have added some notes and portions of the circuit and block diagram to my post on a 1st IF tap on my IC-7410. Further, the design of the 7410 suggests it is a hydrid software defined receiver (SDR), as modulation/demodulation, noise control and the main filtering for different modes, are all done in a firmware-programmed digital signal processor. I bought the 7410 as it seemed the most advanced design of the available TRX in my price range. It is more so than I first thought. In reading the circuit diagram, I wonder if it is possible to tap where the Rx and Tx separate from the shared antenna. If there is such a point, the sdr and TRX Rx may be able to share an antenna at the frontend of the TRX and operate as two separate Rx.